Sopralene flam 180 base sheet for torch

Torch base

Sopralene flam 180 base sheet for torch

Sopralene flam 180 base sheet for torch. SOPRALENE® FLAM flam 180 must be applied only by heat welding or torch- for on techniques. TECHNICAL DATA SHEET. In addition workers installed a Bilco 2- by 4- foot roof hatch for 0. Application method Bonded with hot asphalt Torch applied Strain energy, ( MD/ XD) 9. Sopralene Flam 180 flashing strips on flat roof in Toronto. SOPRALENE 180 SANDED SOPRALENE FLAM 180. concrete deck: torch soprastar flam over soprastar flam 180 over elastophene flam 2. 040- inch pre- finished aluminum gravel guard- style edge flashings. Sopralene Flam 180 is available in a variety of granule finishes. SOPRALENE cap sheets are also available with fire retardant additives sopralene ( FR) sopralene for better fire resistance. Apply sopralene base sheet stripping over primed flanges of installed metal accessories. ( 75 mm) wide laps. Sample double layer system: base sheet for of Sopralene sheet Flam 180 Plain 3mm overlayed with a Sopralene flam Flam 180". Open flam the catalog to page 5. SOPRALENE® FLAM 180 is to sopralene be used as a first or secondary layer under protection in all two- ply elastomeric bitumen waterproofing systems. Sopralene Flam 180AR is torched directly to the prefixed Sopralene Flam 180.
The system is installed as follows: a) Double Layer Sopralene Flam 180 torched directly to substrate. SOPRALENE 180 membranes are composed of a non- woven polyester reinforcement and SBS modified bitumen. Cap Ply: Sopralene FLAM 180 FR GR Sopralene FLAM 250 GR , Sopralene FLAM 180 GR Sopralene FLAM 250 FR GR for torch adhered with minimum 3 in. ( base sheet or barrier board) : " Soprasmart ISO flam HD ". Sopralene flam 180 base sheet for torch. Using a torch flam workers then applied ELASTOPHENE Flam ( base ply), SOPRALENE Flam 180 FR GR sopralene ( cap base ply), SOPRALENE Flam 180 ( flashing base ply) SOPRALENE flam Flam for 180 FR GR ( sopralene flashing cap ply). Elastophene PS is an adhered base sheet membrane composed of SBS modified bitumen and a glass. Base Ply: Sopralene FLAM 180, Sopralene FLAM 250 torch adhered with minimum 3 sopralene in.

The following Insulations for Roofing Systems are sopralene Classified:. Sopralene Flam 180 – A 3mm thick SBS polyesterreinforced sheet, finished. 2 over 1/ 4" per foot tapered insulation adhered to deck. Sopralene Flam 180 and Sopralene Flam 180 FR GR membranes were installed to accommodate all vertical flashings. Sopralene S Flam 30 – A 3mm thick.
reinforced sheet. SOPREMA SOPRALEN FLAM 180 FR GR CAP SHEET TORCH 1SQUARE WHITE Other products by Soprema Roofing. Install sopralene base sheet stripping flam , down inside vertical flam surface, over base sheet on cant strip ( if present), starting at the outer edge of parapet, across top face out minimum of 100 mm ( 4" ) onto field portion of roof. 1 Description: Roofing membrane with a 180 g/ m 2 non- woven polyester reinforcement and thermofusible SBS modified bitumen. 2 Base Sheet Stripping: Soprema Sopralene Flam 180 or IKO TP- 180- FF- Base. SOPRALENE FLAM 180 can be used as a waterproofing membrane on foundation walls sopralene others sheet horizontal vertical below grade concrete surfaces.

The new roof assembly consisted of fastening multiple layers of rigid ISO sopralene torch- welding a Sopralene Flam 180 base membrane, tapered ISO; adhering an 1/ 8 inch Sopraboard, torch- welding a Sopralene Flam 250 FR GR cap membrane. torch- applied layer. Venting base layer Aerisol Flam Underlay Sopralene S. Hot bitumen must not be used in for sopralene the bonding process. Sopralene Flam 180 – A 3mm. Thermally for fuse ( torch) the membrane flashing tie- in strip so it extends s.

( 457 mm) apart with fasteners maximum 6 in. Bwood deck: torch soprastar flam over flam over sopralene flam 180 over soprafix gase 622 simultaneously with 1/ 4" per foot tapered insulation to deck. SOPREMA SOPRALENE FLAM 180 BASE POLYESTER sopralene TORCH 1SQUARE. Complete the membrane flashing base sheet application torch by torch adhering a maximum 990mm ( 39" ) wide strips of the polyester reinforced SBS modified bitumen membrane to act as the membrane flashing tie- in between the laminated base sheet and primary membrane base sheet.

Base sopralene

SBS Modified Bitumen Base Membrane for heat applied applications include: Elastophene PS, Elastophene Flam, Sopralene Flam 180, Sopralene Flam 250 and Sopralene 180 SP 3. Uses: SOPRALENE FLAM 180 is designed to be the base sheet ply in two- ply modified bitumen systems or as a single- layer system when double layers of the material are used at all transitions, drains and corners. SOPRALENE® 180 Sanded is an SBS- modified bitumen base ply for use in approved multi- ply membrane and flashing assemblies. SOPRALENE 180 Sanded is composed of a proprietary formulation of elastomeric styrene- butadiene- styrene ( SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non- woven polyester mat. Sopralene Flam 180 - a SBS modified bitumen sheet waterproofing membrane used as a base layer in a double layer system. The lower and upper face has a thermofusible film which is torched off during application.

sopralene flam 180 base sheet for torch

It is supplied as a roll 3 mm thick, 1 m wide and 10 m long. Underlays Elastophene Flam 25s – A 2. 5mm thick SBS glassreinforced torch- applied layer.